Brakes/Levers/Pads

Disc Brake Adapters

Brass hose insert for Hope hydraulic disc brakes.

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Odyssey A Brake shoes for all your braking needs.

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

- Plastic clip prevents pistons from pressing in while wheel is off of the bike - Fits: Marta, Louise, Clara, Julie

Bontrager's high performance level replacement cartridge brake pads. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Standard linear pull brake pads for an economical replacement. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Standard compound (STD)—All-around rubber pad compound - Sold in pairs

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Disc Brake Service Kit for Elixir - Includes pistons, seals, and bleed screws

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

Replacement levers pivots pin kit for Hayes hydraulic disc levers

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Formula brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

- SLIP RESISTANT & COMFORTABLE - MULTI-TEXTURED GRIP FOR - OPTIMIZED FEEL & CONTROL - UNIVERSAL FIT FOR MOST BRAKE LEVERS - 2 SETS OF LEVER GRIPS INCLUDED

Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

The Springfield lever features an easy to install and remove design. - Easy to install and remove without having to wrestle grips on and off - Die-cast clamp design

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Hose fittings for Hayes hydraulic disc brakes

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts