Parts

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings

The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty

Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)

The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)

The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

Small parts for Wolf Tooth ReMote.

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick

These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. - Designed for M8 x .75 thread pitch - 10mm long - 4mm hex head - Bolt length is laser engraved onto the bolt head for easy length identification - 6-7 Nm installation torque with light grease on threads only

Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick

Roadlink Rear Derailleur Part - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

Ergonomic silicone grips from Wolf Tooth. - Multi-position ergonomic design - Unique design increases grip and comfort while climbing

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum